Keep The Power On When Vallejo Goes Dark
Standby generator installation with automatic transfer switches, sized for your real load and ready for the next PG&E shutoff. Permitted through the City of Vallejo, inspected, and warrantied.
Request A Free On-Site Scope
We call back the same day. No call center, no rotating crew. Steve answers the phone and sizes your system.
Or call (707) 803-6332Backup Power That Actually Carries The House
Vallejo sits in PG&E territory that has seen its share of Public Safety Power Shutoffs, and a generator is only useful if it is sized to run what you actually need. Towers EC installs standby generators and automatic transfer switches out of our Vacaville shop, load-calculated, permitted through the City of Vallejo, and inspected. Master Electrician CA Lic. 847255.
When you call Towers EC about backup power in Vallejo, you get Steve Torres. The electrician who built server rooms that had to stay up no matter what knows how to build a home system that does the same. No dispatcher, no rotating crew.
Schedule A Free On-Site Scope- Sized off a load calculation: the generator carries your real demand, not a box sticker.
- Automatic transfer switch: the system takes over within seconds, no manual switching.
- Built for PG&E shutoffs: fire-season outages handled without losing the fridge or well pump.
- Permitted & inspected: City of Vallejo permit and gas connection done right.
- Lifetime labor warranty: if our installation fails, we come back at no charge.
Generator Systems We Install In Vallejo
From a whole-home standby unit to a simple portable hookup, we build the system to fit the property and the budget.
Whole-Home Standby
A permanently installed generator that starts on its own and runs the whole house through an outage. The set-and-forget option.
Automatic Transfer Switch
The brain of the system. It isolates your home from the grid and switches to generator power within seconds of an outage.
Essential-Circuit Systems
A smaller generator wired to carry the circuits that matter: fridge, well pump, furnace, a few lights and outlets.
Portable Generator Hookup
An inlet and interlock so you can safely power your home from a portable unit without dangerous back-feeding.
Gas & Propane Connection
Natural gas or propane feed sized and connected correctly so the generator runs as long as the fuel lasts.
Commercial Backup
Backup power for Vallejo businesses that cannot afford to go dark, sized to the critical load and code-compliant.
Frequently Asked Questions About Vallejo Generator Installation
What size generator do I need for a home in Vallejo?
It depends entirely on what you want to keep running. A whole-home standby unit is sized off a load calculation, not off a sticker on the box or a rule of thumb. We add up the circuits that matter to you, from the refrigerator and well pump to HVAC and the panel loads you cannot live without, and size the generator and the transfer switch to carry them together. Undersizing is the most common mistake we see corrected, where a generator was bought first and the load figured out after. We do it in the right order. Call (707) 803-6332.
Will a standby generator keep my Vallejo home running during a PG&E shutoff?
Yes. That is exactly what these systems are built for. A properly sized standby generator with an automatic transfer switch detects the outage the moment PG&E cuts power, starts the generator, and switches your home over within seconds, all without you doing anything. When utility power comes back, it switches back and shuts the generator down. Through a Public Safety Power Shutoff, your home simply keeps running. For anyone in Vallejo tired of losing the freezer and the well pump every fire season, that is the point.
Do you install the transfer switch too, or just the generator?
Both, always, as one system. The transfer switch is the part that safely separates your home from the grid so the generator cannot back-feed power onto the utility line, which is a serious hazard to line workers and to your own equipment. We install the generator, the transfer switch, and the gas or propane connection together, permitted and inspected as a complete unit. A generator without a properly installed transfer switch is not a finished job.
Is Towers EC licensed for generator installation in Vallejo?
Yes. CA Lic. 847255, Master Electrician. Steve Torres has 30+ years of experience and pulls every generator permit through the City of Vallejo in his own name. Generator work involves service-entrance wiring, a transfer switch tied to your panel, and a fuel connection, so it is exactly the kind of installation you want a licensed master electrician on. You can verify the license at the California Contractors State License Board website.
How do I get a generator quote for my Vallejo property?
Call (707) 803-6332 or email storres@towersec.net. We come out, run a load calculation, look at where the generator can go and how the gas or propane will feed it, and give you a scope in writing with no obligation. We would rather tell you honestly what size you actually need than sell you more generator than the house calls for. The visit is free.
Never Sit In The Dark Again.
Towers EC serves Vallejo and all of Solano County. The person who picks up is the person who shows up. 30+ years of electrical work, CA Lic. 847255.
View our project gallery or contact us to schedule a free on-site scope in Vallejo.
Why Backup Power Matters More In Vallejo
Vallejo homeowners have lived through the reality of Public Safety Power Shutoffs for years now. When the wind picks up and the fire risk climbs, PG&E de-energizes lines across large swaths of Northern California, and Vallejo is regularly inside that footprint. An outage that lasts a few hours is an inconvenience. One that stretches into a day or more is a real problem: the refrigerator and freezer thaw, the well pump on properties out toward the edges of town stops, medical equipment loses power, and anyone working from home is simply offline. A standby generator turns all of that from a crisis into a non-event.
Sized For The House, Not The Shelf
The most important decision in a generator install happens before anything gets bolted down: the sizing. We run a load calculation on the circuits you actually want backed up. Some homeowners want the whole house. Others want the essentials, the fridge, the furnace, the well pump, and enough lighting and outlets to live normally. Either is fine, but the generator and the transfer switch have to be matched to that choice. Buy a unit that is too small and it stalls or trips when the HVAC kicks on. Buy one that is too big and you paid for capacity you will never use. We size it right the first time.
The Transfer Switch Is The Safety
Every system we install includes a properly installed automatic transfer switch. This is not optional and it is not a place to save money. The transfer switch physically isolates your home from the utility grid before the generator energizes your panel, which protects PG&E line workers from being shocked by power you are feeding back up the line, and protects your generator and appliances from a damaging surge when grid power returns. When utility power comes back, the switch transfers back automatically and shuts the generator down. You never touch it.
Permitted, Fueled, And Warrantied
We pull the City of Vallejo permit, connect the natural gas or propane feed, and pass the inspection before we call the job done. That inspection record matters for your insurance and at resale. And because the work is ours, installation labor carries a lifetime warranty: if our installation fails, we come back at no charge. If you manage a Vallejo home or business that cannot afford to go dark, get us out for a free load calculation and a scope in writing. Call (707) 803-6332 or contact us here.