Vallejo’s Electrical Installation Company
New construction, tenant improvements, and service upgrades across Vallejo and Mare Island. Planned from the panel out, permitted through the City of Vallejo, inspected before we close it up.
Request A Free On-Site Scope
We call back the same day. No call center, no rotating crew. Steve answers the phone and opens your panel.
Or call (707) 803-6332Installation Built To Last In Vallejo
Towers EC works out of Vacaville and covers Vallejo, Benicia, Fairfield, and the rest of Solano County. Master Electrician CA Lic. 847255. Every installation is planned from the panel out, permitted through the City of Vallejo, and inspected before it is closed. Installation labor carries a lifetime warranty.
When you call Towers EC from Vallejo, you get Steve Torres. Not a dispatcher, not a subcontracted crew. The electrician who built server rooms that ran the early internet, who has pulled permits across Solano County for over 30 years, is the person who scopes your job and does the work.
Schedule A Free On-Site Scope- Master Electrician on every job: CA Lic. 847255. Steve Torres in person.
- Built for Vallejo’s older homes: knob-and-tube and aluminum wiring handled correctly.
- Permits pulled, inspections passed: the City of Vallejo paperwork is on us.
- Lifetime warranty on install labor: if our installation fails, we come back at no charge.
- Load-calculated first: the service is sized for the real load before the first circuit goes in.
What We Install In Vallejo
Full-scope electrical installation for Vallejo homes, waterfront properties, and commercial tenants. Same master electrician standard as our Vacaville work.
New Circuits & Additions
Dedicated circuits for EV chargers, kitchen appliances, workshops, and outdoor power. Sized correctly, labeled, documented.
Service Upgrades
200A and 400A service where the old panel cannot carry the load. Utility coordination with PG&E handled. Panel upgrades here.
Rewiring Older Homes
Vallejo’s Victorian and mid-century housing stock often hides knob-and-tube or early aluminum. We rewire the runs that need it, safely.
ADU & Guest Unit Wiring
Full electrical buildouts for accessory dwelling units and garage conversions, from subpanel to finished fixtures.
Commercial Tenant Improvements
Downtown Vallejo and Mare Island tenant wiring, lighting, and service work, scheduled around your operation.
Generator & Backup Power
Standby generator hookups with automatic transfer switches for the PG&E shutoff season. Generators here.
Frequently Asked Questions About Vallejo Electrical Installation
Does Towers EC serve Vallejo, CA?
Yes. Based in Vacaville, we serve all of Solano County including Vallejo, Benicia, Fairfield, Suisun City, Dixon, and Rio Vista. Vallejo is a straight run down Interstate 80, so it is easy for us to schedule a site visit within a few business days. Call (707) 803-6332 or email storres@towersec.net.
What is the license number for Towers EC?
CA Lic. 847255, Master Electrician. Steve Torres has held this license for 30+ years and pulls every permit in his own name. You can verify it at the California Contractors State License Board website before we ever come out.
Do you pull permits for electrical work in Vallejo?
Yes. Permit-required installation work is handled through the City of Vallejo building department. We prepare the application, pull the permit in Steve Torres’s name, schedule the inspection, and hand you the signed-off documentation when the work is complete. That paperwork protects you at resale and keeps your insurance clean.
Can you install electrical in older Vallejo homes with knob-and-tube or aluminum wiring?
Yes, and a lot of Vallejo’s housing calls for exactly that. The Victorians near the waterfront and the mid-century homes across the older neighborhoods frequently still carry knob-and-tube or early aluminum branch wiring. We assess what is actually in the walls, plan the new installation around it, and rewire the runs that need replacing so the finished work is safe and passes inspection. We do not just tie new work onto wiring that should have retired decades ago.
How do I schedule an electrical installation visit in Vallejo?
Call (707) 803-6332 or email storres@towersec.net. We cover Vallejo regularly out of Vacaville and can typically schedule a free on-site scope within a few business days. There is no commitment. We look at the job, tell you what it will take, and put the scope in writing before any work begins.
Do I need a service upgrade before adding new circuits in my Vallejo home?
Sometimes. It depends on what the existing service can carry and what you are adding. An EV charger, a kitchen remodel, an ADU, or a heat pump each add real load, and on an older Vallejo home the original panel may already be near its limit. We run a load calculation before installing anything, so we know whether the panel can take the new circuits or needs upgrading first. That up-front math is what keeps the finished work from tripping breakers under normal use.
Ready To Start? Call The Master Electrician.
Towers EC serves Vallejo and all of Solano County. The person who picks up is the person who shows up. 30+ years of electrical work, CA Lic. 847255.
View our project gallery or contact us to schedule a free on-site scope in Vallejo.
Electrical Installation Across Vallejo: Waterfront To Hilltop
Vallejo is one of the most architecturally mixed cities in Solano County. The waterfront and downtown carry blocks of Victorian and Craftsman homes, many of them well over a century old, while the neighborhoods up the hill and out toward Glen Cove range from mid-century ranch to newer subdivision builds. Mare Island, once the Navy shipyard that put Vallejo on the map, is now a growing mix of commercial tenants, adaptive-reuse buildings, and residential development. Each of those settings starts from a completely different electrical baseline, and the first job on any installation is figuring out what you actually have before we add to it.
Residential Installation In Vallejo
New circuit installation for EV chargers, kitchen and laundry appliances, workshops, and outdoor power. Service upgrades when the existing capacity does not meet the load. ADU and garage-conversion electrical buildouts, which have become common across Vallejo as homeowners add rental units. Rewiring projects on the older waterfront homes where the original knob-and-tube or early aluminum wiring has aged past safe service. Standby generator installation with automatic transfer switching for properties that lose power every fire season.
Commercial Installation In Vallejo
Tenant improvement wiring for downtown storefronts and Mare Island commercial space, service upgrades for buildings changing tenant use, lighting installation in retail and restaurant spaces, and coordination with the City of Vallejo building department on permits and inspections. We know how to schedule inspections to avoid delays and how to document the work so a general contractor can keep a timeline moving.
Planned From The Panel Out
The difference between an installation that works for 30 years and one that causes trouble within a year usually comes down to whether the service was sized for the real load before the first circuit went in. We start at the panel. A load calculation tells us whether the existing service can carry what you are adding, or whether it needs an upgrade first. Skipping that step is how a kitchen remodel ends up tripping a breaker every time the oven and the dishwasher run together, or how a garage shop browns out the lights when the compressor kicks on.
That planning matters more in Vallejo because the housing stock spans such a wide range. A 1900 waterfront Victorian and a 1990s hilltop build have almost nothing in common electrically, and a storefront that used to be a quiet office becomes a problem when a new tenant brings in equipment the circuits were never meant to feed. We scope the install for what the space will actually carry, build it to current code, pull the permit, and pass the inspection. Installation labor carries a lifetime warranty. If our work fails, we come back at no charge. Call (707) 803-6332 for a free on-site scope.